The backbone of your IT infrastructure. Switches ensure that packets of data are reliably and swiftly transmitted between different devices in your network.
Routers are the gateway between your network and the internet. As the name suggests, they “route” the connection between all of your devices and their intended destination on other networks and the internet.
In a fast-changing business landscape where more and more devices are transitioning to wireless connectivity, wireless networks are becoming not only increasingly important, but critical to maintaining the interconnectivity of IT infrastructure and productivity.
In the age of big data, businesses are required to store large amount of data, either willingly or unwillingly to efficiently operate their business. This gives a great liability on businesses to ensure the safety of this data.
Our technology partners have brought to market all-in-one server solutions. These all-in-one server chassis allow for more accessible ways to provide switching, virtualization, computing and storage solutions for your business.
Our partners specialize in getting you up and running on the latest, state-of-the-art communications solutions. Whether it is for conference calls, video conferencing, or getting your entire operations and up and running for remote work.
When it comes to network speed and security, hard lines are still the safest option. We have a vast inventory of cabling solutions that support every interface you may require at varying distances.
Networking hardware doesn’t stop at the core hardware, from stack kits, to stack cables, to redundant power supplies to rack mounts, ensure your project is complete with a wide selection of in-stock and ready-to-ship accessories.
| Features | |||
|---|---|---|---|
|
Content |
AIR-AP1810W-B-K9-NEW |
||
|
Details |
|
||
|
Category |
|||
|
Stock |
|||
| Brand | Cisco |
|---|
Â
Â
| Interfaces | - 1 10/100/1000BASE-T PoE uplink port - 1Â Management console port (RJ-45) - 3 10/100/1000BASE-T ports (local Ethernet ports), including 1 PoE out port - 1Â passive pass-through port RJ-45 (back to bottom) - 1Â DC power connector |
| Features | 2x2 single-user/multiuser MIMO with two spatial streams Maximal ratio combining (MRC) 20-, 40- and 80-MHz channels PHY data rates up to 866.7 Mbps (80 MHz on 5 GHz) Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Rx) 802.11 Dynamic Frequency Selection (DFS) Cyclic shift diversity (CSD) support |
| Regulatory Domain | B (B regulatory domain): - 2.412 to 2.462 GHz; 11 channels - 5.180 to 5.320 GHz; 8 channels - 5.500 to 5.720 GHz; 12 channels - 5.745 to 5.825 GHz; 5 channels |
| System | - 512 MB DRAM - 256 MB flash - 1.4 GHz system dual-core CPU |
| Dimensions (W x L x H) | 165 x 114 x 41 mm (Access point without mounting bracket)) |
| Weight | 560g (Access point without mounting bracket or any other accessories) |
| Authentication and security | Advanced Encryption Standard (AES) for Wi-Fi Protected Access 2 (WPA2)802.1X, RADIUS authentication, authorization and accounting (AAA)802.11i |
| Software | Cisco Unified Wireless Network Software with AireOS Wireless Controllers Release 8.2.111.0 or later |
| Maximum clients | Maximum number of associated wireless clients: 200 per Wi-Fi radio, in total 400 clients per access point |
| 802.11ac | 2×2 single-user/multiuser MIMO with two spatial streamsMaximal ratio combining (MRC)20-, 40- and 80-MHz channels PHY data rates up to 866.7 Mbps (80 MHz on 5 GHz)Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Rx)802.11 Dynamic Frequency Selection (DFS)Cyclic shift diversity (CSD) support |
| Ethernet ports | Authentication with 802.1X or MAC filteredDynamic VLAN or per port traffic locally switched or tunneled back to wireless LAN controller |
| Bluetooth (future availability) | Integrated Bluetooth 4.1 (including BLE) ratio maximum transmit power: 5 dBmAntenna gain: 2 dBi |
| Integrated antennas | 2.4 GHz, gain 2 dBi5 GHz, gain 4 dBi |
| Interfaces | One 10/100/1000BASE-T PoE uplink port management console port (RJ-45)Three 10/100/1000BASE-T ports (local Ethernet ports), including one PoE out port: Â PoE out provides 802.3af when the access point is powered by Cisco local power supply (AIR-PWR-C=, AIR-PWR-D=), or ~6.5W when powered by 802.3at, or no output when powered by 802.3af One passive pass-through port RJ-45 (back to bottom)DC power connector |
| Indicators | Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors per-port status for local Ethernet ports privacy, LEDs are automatically turned off when the access point joins a controller. LEDs may be enabled to be administratively – see configuration guide. |
| Dimensions (W x L x H) | Access point (without mounting bracket): 6.5 x 4.5 x 1.6 in. (165 x 114 x 41 mm) |
| Weight | Access point without mounting bracket or any other accessories: 1.2 lb (560 g) |
| Environmental | Nonoperating (storage) temperature: -22 to 158 F (-30 to 70 C)Nonoperating (storage) maximum altitude: 25 C, 15,000 ft (4,500m)Operating temperature: 32Â to 104 F (0 to 40 C)Operating humidity: 10% to 90% percent (noncondensing)Operating maximum altitude: 40 C, 9843 ft (3,000m) |
| System | 512 MB DRAM256 MB flash1.4 GHz system dual-core CPU |
| Input power requirements | 44 to 57V DCOptional power supply and power injector: 100 to 240V AC; 49 to 60 Hz |
| Powering options | 802.3af/at Ethernet switch optional Cisco power injectors (AIR-PWRINJ5=, AIR-PWRINJ6=)Optional Cisco local power supply (AIR-PWR-C= or AIR-PWR-D=) |
| Power draw | Maximum values: 12.95W (15.4W with 100m of cable) with no PoE out, 20.7W (22W with 100m of cable) with 6.49W PoE out and 27.65W with 12.95W PoE out (when powered using AIR-PWR-C or AIR-PWR-D) Note: When deployed using PoE, the power draw numbers listed above include the power loss in 100m of cabling on the uplink port and 100m of cabling on the PoE out port. |
| Physical security | Torx security screw, included with the access point Kensington security slot |
| Mounting | Included with the access point: mounting bracket AIR-AP-BRACKET-W2, compatible to install to a single gang junction box or multiple international standard optional:  AIR-AP1810W-KIT=, spacer kit to mount the access point directly on a wall where standard junction boxes are not available  AIR-OEAP1810-CRD=, cradle kit to mount the access point on a desk |
| Accessories | Mounting bracket: AIR-AP-BRACKET-W2= (available as spare)Spacer kit: AIR-AP1810W-KIT= (sold separately), includes spacer and RJ-45 jumper cableCradle kit: AIR-OEAP1810-CRD= (sold separately), includes back cover and RJ-45 jumper cablePhysical security kit: AIR-SEC-50= (sold separately), with 50 pcs. security screws used to secure the access point onto wall-mounting bracket, 50 pcs. RJ-45 caps and 2 pcs. unlock keys used to block physical access to Ethernet portsCisco local power supply: AIR-PWR-D= (sold separately) |
Â
Â
Â
Ask for a Quote
Ask for a Quote
Ask for a Quote
Frustrated with expensive OEM service contracts with difficult to reach support? VodaCare can help you save 30-60% off your extended hardware service contracts with even better support than the OEM! We’ll get you connected to a certified level 4 and above engineer in as little as 10 minutes. We also offer next day hardware replacements so your system can remain online with minimal interruptions. Ask your representative about VodaCare to learn more.
We’ll immediately connect you to a professional to assist you.
